Caring for your Rayburn Cooker

DidYouKnow "70% of "

It is vital to have your Rayburn cooker serviced regularly to ensure that it performs like a dream, morning, noon and night. By having your Rayburn cooker serviced by Rayburn Guild Engineers you can guarantee that all the parts used are authentic and that the engineer working on your cooker is fully trained and qualified. After all, no one knows better than we do how to get the most out of a Rayburn.

To find out more about servicing visit Servicing and Find a Rayburn Heat Centre Engineer.

 

 

A Rayburn is very easy to keep clean, particularly if you don't allow it to become dirty! The following tips may be of help.

Brush3
The main, hot ovens and hotplates help to keep themselves clean by carbonising cooking spills and splashes. Just brush off the carbon dust. For stubborn stains, don't be afraid to use a wire brush on the plain cast-iron components.

Splashes and spills on the vitreous enamel should be wiped away as soon as possible, using a damp (not wet) soft cloth.  The AGA e-cloths are ideal. You can use a specific product such as the AGA and Rayburn enamel cleaner. Never use a cold wet cloth.

If spills have become baked on to the enamel, use a soap filled pad, not too coarse, so as to avoid scratching the enamel. DO NOT use 'oven cleaners'.

Likewise the inner linings of the oven doors and insulating lids can be cleaned with a cream cleanser or for more stubborn marks, a soap filled pad.  The lining will show some marks but will shine beautifully.

 

Rayburn -Lid

The polished insulating lids and handrail can be cleaned with a damp soapy cloth, followed by a wet cloth, finishing by polishing with a clean dry cloth.  Again the AGA e-cloths are excellent and lint free.

Any spillage of milk or fruit-juice on to the enamel, must be wiped up straight away, as the acidity may stain the front plate and doors.

If liquids boil over or spill over around the hotplates, disappearing under the top plate, don't worry, they will soon evaporate without damage.

Some components such as the handrail brackets and side panels are powder coated (painted) and nothing abrasive should be used on them, even 'Astonish', use a soap filled pad.

If you see fluff or dust building up around the burner door or the flue chamber, this can be safely removed with a soft brush. Do not use a vacuum cleaner, when the burner is alight.